Hand forged to order from solid reclaimed iron, these modern drawer pulls are a perfect addition to add some unique style to your home. Message me for a quote and lead time on orders of 10+ pieces. Back plates are available for an additional cost. The total projection is 1"-1.5" depending on size selected. Clearance is .85"-1.125" from cabinet face. Length measurements vary by approximately .18" and are based on hole center to center measurements. All dimensions vary slightly as these are hand forged items. Price is per piece. Thickness of material used is as follows in either square or round steel: 3/8" solid steel up to 12" 1/2" solid steel for above 12" MOUNTING INSTRUCTIONS AND SCREWS INCLUDED! Standard screw length is 1" and will fit most cabinets which are .75" thick. If you require longer or shorter screws, let me know. PLEASE READ: Items are hand made using traditional blacksmithing techniques, therefore no two are exactly the same. Small variations in dimensions and shape may be present in each piece. Items may vary from photos slightly. Mounting Instructions: insert provided threaded studs into each hole. Mark mounting location. Drill 3/16" holes at each mark. Remove threaded studs. Insert machine screws into holes from behind cabinet, and screw into pull.