Wooden Laser Cut Halloween Haunted House Candle Holders, Haunted Displays The length is measured from far left to far right and height is measured from the highest point to the very lowest point. Displays measure approximately.... Ghost Display: 8" width 5.9" height Pumpkin Display: 8" width 7.6" height 3.25" base with slot so displays fit into place and stand on their own. Made from 1/4" sanded wood. *Please Note*** Some pieces are delicate so care is needed when handling them. Flameless candles are recommended (not included) *Item is cut using a laser, the edges are burned therefore, there may be some black residue left and a slight odor after we clean them. The edges will be black from the burning process. **As with every wood item, each piece will be different and can have small defects of cracks, knots, or blemishes. Stain/paint color and engravings can also very slightly due to the characteristics of the wood. Paint can be a little tacky/sticky. Avoid placing sides directly on top of each other when storing. We do not accept any returns, if you have an item damaged from shipping let us know and we will be able to help you out!