The earrings are made from a mold that, I've also made the mold to do these earrings. The frame is made first of course. It's made with Uv resin mixed with Black mica powder. Since the mold and piece is pretty small, the black uv resin is poured into a needle tipped squeeze bottle. After the mold is filled, it put under a uv light to cure. When its cured, the frame is removed from the mold. The pieces are then attached to tape so the open areas can be filled with red uv resin and a little bit of white uv resin. Then the pieces are place under the uv light to cure the remaining colors. The pieces are removed from the tape and the ear wire hooks are attached to the loop at the top.