Alumilite™ Amazing Mold Rubber
Item #
10324147
$24.99
Promotions
Alumilite™ Amazing Mold Rubber
$24.99
Promotions
Details
https://www.michaels.com/super-caoutchouc-%C3%A0-moulage-alumilite/10324147.htmlProduct Actions
Description
Create an intricately detailed mold with this Alumilite™ Mold Rubber Kit. This silicone material is easy to use and can be cured within two to three hours. Flexible and strong, this mold making material can be used to make one-piece or multiple-piece molds.
Details:- Pink
- 3/4 lb.
- Can be demolded after 2 to 4 hours
- 1 bottle of rubber
- 1 bottle of hardner
- 2 measuring cups
- 1 tablespoon
Create an intricately detailed mold with this Alumilite™ Mold Rubber Kit. This silicone material is easy to use and can be cured within two to three hours. Flexible and strong, this mold making material can be used to make one-piece or multiple-piece molds.
Details:- Pink
- 3/4 lb.
- Can be demolded after 2 to 4 hours
- 1 bottle of rubber
- 1 bottle of hardner
- 2 measuring cups
- 1 tablespoon
Alumilite™ Amazing Mold Rubber is rated
out of
5 by
44.
Rated 1 out of
5
by
pegster64 from
POOR SETTING
I bought some of this stuff and it drew in my item into the molding and i couldn't get it out so this stuff is GARBAGE.
Date published: 2020-10-20
Rated 5 out of
5
by
Creativo from
Easy molding
I was very surprised how easy and well this stuff works. The molding I created came out very smooth and durable. The Molding does pick up on a every little thing, even glue strokes. I purchased 2 boxes and used them both for this one project.
Date published: 2020-10-17
Rated 1 out of
5
by
DavDav from
Never cured - catalyst was bad
I poured last night and wondered why it didn't cure, even after 12 hours. The material was completely white, but on the box, it's supposed to be pink. I took a closer look at the catalyst, and, despite vigorous shaking, the catalyst was mostly clear - except where a large pink segment has seemingly solidified, of its own accord, on the side of the bottle, and would not mix with the rest of the catalyst solution.
I should've checked the catalyst first, but this was my first time using a catalyst instead of the "equally measure parts a & b" approach. The product must've been old. I wish the instructions had explicitly said the catalyst should be pink before mixing. This ruined my master, and now I have a mess to clean up and figure out how to properly dispose of.
Date published: 2020-09-20
Rated 5 out of
5
by
Kjrinaz01 from
Important
Before you buy, this is a tin based silicone it is cheaper than the platinum based silicone. certain resins do not cure well in tin based, but will in platinum. The resin Michaels sell does not cure in tin based silicone. If you want a mold to be used with a wide range of materials I would recommend a platinum based silicone.
Date published: 2020-07-21
Rated 1 out of
5
by
TapphireCreations from
Resin did not cure properly in mold
After months of working with this product to get a usable mold, I'm very disappointed with the outcome. My first attempts (and failures) were my fault, I failed to mix the material properly and the rubber stuck to my original. Learning from that, I went on to cast a different mold which has been sitting for 2 months before I could finished the final layers (4 kits to finally accomplish the mold, but it was a larger piece). SO after all that time (and expense!) I finally poured my first resin creation with this mold using Alumilite resin. All the other pieces I cast in this batch cured completely fine, but the two pieces I cast in my silicone molds made with the Alumilite mold rubber are soft, partially cured where the resin was in contact with the rubber and has an oily filmy feel to the resin. All that waiting and cost and I couldn't be more disappointed with the result.
Date published: 2020-05-26
Rated 5 out of
5
by
meCu from
Great to have around
Works as it says on the box Fast and easy to use Love the outcome of the moulding and flexible
Date published: 2020-05-08
Rated 5 out of
5
by
modeldummy from
mold maker
I got the mold making rubber and used it .It worked just as I needed and I am statisfied with it.
Date published: 2020-04-29
Rated 5 out of
5
by
WD1975 from
Great casting product
This is a high tear resistant mold rubber capable of harsher casting projects where sometimes the most desirable draft angle can’t be achieved. I do a fair amount with model railroading and has served me well.
Date published: 2020-03-14